Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Newark: What to Know First
We repair and rebuild Olympia Chimney systems in Newark, and most liner work is completed in one day once we’ve confirmed the scope. A stainless steel liner replacement on an Olympia setup typically runs $2,200 to $4,800 depending on flue height and access, and we hand you a written price before any tool leaves the truck. If you’re seeing flue tile fragments in the firebox, rust streaks on the exterior brick, or your carbon monoxide detector has tripped near the fireplace, call (862) 245-4309 and we’ll schedule a camera inspection.
This page is for Newark homeowners who own an Olympia Chimney product and need straight answers about liner repair, partial rebuilds, or full chimney reconstruction. We’re an independent Olympia Chimney service provider, not a factory-authorized shop, which means we repair what’s actually failing rather than pushing a brand-specific part when a better option exists.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney builds solid stainless steel liner systems, but we see the same handful of failure points across their product lines in Newark homes. Here’s what actually goes wrong, by the series:
- Olympia Ventis Flue Liners (rigid stainless): These hold up well, but we regularly find failed mortar joints where the liner meets the clay tile at the smoke chamber. Rain gets in, the mortar erodes, and combustion gases find a detour. The fix is a partial rebuild of the transition, typically with a new anchor plate and fresh refractory mortar.
- Olympia Chimney Flexible Liners: In Newark row houses near Branch Brook Park with original clay flues, flex liners in uninsulated chimneys cool too fast on winter nights. That causes rapid creosote condensation inside a liner that should run clean. We insulate the liner cavity with a vermiculite or ceramic wrap, which also brings the install up to NFPA 211 clearance standards.
- OEM terracotta flue tiles paired with Olympia caps: We’ll pull an Olympia cap and find the clay liner beneath it spalling (flaking apart) from decades of freeze-thaw cycling. The cap wasn’t the problem, it was just sitting on top of it. A new insulated stainless liner inside the old flue solves it without tearing down the chimney.
- Olympia Chimney Chase Covers and top plates: On prefabricated setups, the chase cover rusts through at the corners where water pools. Rot at the top then drips down into the firebox. We replace the chase cover with a stainless version and, when the surrounding framing is damaged, rebuild that section of the chase.
- Improperly sized Olympia liner installed by a previous company: This is more common than anyone wants to admit. A 6-inch liner forced into an 8-inch flue with no measurement of draft. The appliance can’t breathe, backdrafts, and soot coats the face of the fireplace. The camera shows us the gap and the draft reading tells us the fix: pull it and size correctly to the appliance’s BTU output.
One Newark-climate reality worth stating plainly: our freeze-thaw cycles are rough on any masonry chimney with a liner that isn’t insulated. Brick absorbs water, freezes, expands, and spalls. Corrine Halstead has written up enough of these to know the pattern: a liner failure is rarely just a liner failure, it’s a drainage or insulation problem waiting for the next winter.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, day or night, at (862) 245-4309. We schedule a visit and text you the name of the tech coming out, plus a heads-up when they’re on the way.
- 2
Camera inspection first. We run a camera down the flue and document everything. You see the footage on the spot. We also check the crown, the smoke chamber, and the firebox. No recommendations until the camera comes back up.
- 3
Written scope and written price. We put the findings, the fix we recommend, and the line-item price on paper before any work starts. Per Haven Standard Clause 1, nothing is verbal-only. If you have a competitor’s written quote, bring it, we’ll do a free second opinion on it.
- 4
The repair or rebuild. For liner work we use stainless components from Olympia Chimney, DuraFlex, or HeatShield depending on the application. We’re not locked into one brand, we fit the liner to the flue and the appliance. Partial rebuilds include new masonry, flashing, and crown work where needed.
- 5
Test and document. We run a draft test after the install, take a final camera pass, and photograph every stage of the finished job. Clause 4 of the Haven Standard requires a photo record on every job, and that’s been our practice since 2009.
- 6
Warranty and follow-up. Every job is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right. You keep the written scope, the photos, and the warranty.
“The camera doesn’t negotiate - it just shows what’s there.” We’ve built the whole process around that.
BeforeAfterWhat Olympia Chimney Chimney Liner & Rebuild Costs in Newark
Here are the ranges we quote for common Olympia Chimney jobs in Newark. Every number below includes the written scope and photo documentation:
- Stainless steel flexible liner replacement (single story, straight flue): $2,200 - $3,400
- Rigid stainless liner with smoke chamber parging: $3,800 - $5,200
- Partial rebuild (top 10 to 15 courses of brick, new crown, new flashing): $2,800 - $5,500
- Full chimney rebuild from roofline up: $7,500 - $14,000 depending on height, access, and scaffolding needs
- Chase cover replacement on prefab Olympia systems: $700 - $1,400
What moves the number: flue height, roof pitch and access, whether we need a lift or can ladder it, the condition of the flue tiles we’re dropping the liner into, and whether the crown can be resurfaced or needs full rebuild. Call (862) 245-4309 for a written estimate after a camera inspection. Estimates are free.
Why Newark Homeowners Call Level Two Chimney Newark for Olympia Chimney Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, every one with a written price before work started and a documented record when it was done. That’s not a slogan, it’s the Haven Standard we’ve answered to since day one. Our techs are background-checked, uniformed, and they know Olympia Chimney products well enough to tell you when the OEM part is the right call and when a DuraFlex, HeatShield, or Gelco component does the same job for less. We don’t do flashlight inspections. We don’t do verbal quotes. We show you the camera footage and write down the numbers before you commit to anything. When you call, you get a person. When we finish, you get photos. If it’s not done right in the first year, we make it right.
FAQs
In most cases, no. Olympia Chimney warranties cover defects in the product itself, not installation or environmental failures. We use OEM or equivalent stainless components where appropriate, and we document the install with photos so you have a record for any future claim. As an independent Olympia Chimney service provider, we never claim factory authorization, but our work is done to NFPA 211 standards and doesn’t introduce anything that would void the product warranty.
Yes, most liner replacements on single-flue setups are done same day once the inspection confirms the scope and we have access to the roof. The camera inspection takes 45 minutes, the liner drop and insulation take a few hours, and the draft test and final camera pass take another half hour. Call (862) 245-4309 to see if your chimney fits a same-day schedule.
You see flue tile chunks in the firebox, rust flakes on the damper, or you get smoke in the room even when the damper is open. Those are signs the liner is breached. A camera scan confirms it. We show you the footage before we quote anything. If the liner is pitted but intact, we’ll tell you it can wait. If it’s split, we’ll tell you why and what it costs to fix.
We do. We install and repair liners from DuraFlex, HeatShield, and Gelco as well. Our recommendation depends on the flue dimensions, the appliance, and what’s already in place. We fit the liner to the chimney, not the other way around.
Once a year, and after any major weather event that drops tree limbs or shakes the masonry. Older row houses near Branch Brook Park with original clay flues and uninsulated liners tend to build creosote faster than the suburban track homes, and a yearly camera pass catches liner pitting before it becomes a fire or carbon monoxide problem.
Written by Corrine Halstead, Owner, Level Two Chimney Newark at Level Two Chimney Newark, serving Newark and nearby areas.