Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Newark: What to Know First

We provide independent Famco chimney cap and crown service in Newark, with most cap replacements completed in one visit and crown repairs scheduled within three to five business days. A Famco cap replacement in Newark typically runs $340-$590 installed, and a full crown recoat starts around $450, with the exact number written down before work begins. If you own a Famco cap or crown and something looks wrong, call (862) 245-4309 and we’ll schedule a camera inspection with a written price attached.

Call (862) 245-4309

How Famco Products Fail - and How We Fix Them

• Famco galvanized cap bases on older F-5 and F-6 round caps: The base collar corrodes at the weld points where the screen meets the collar, especially within three blocks of the Passaic River or anywhere salt air pushes in off Newark Bay. We swap the base with a stainless replacement and keep the original hood if it’s still sound, which saves about 40% versus a full cap replacement.
• Screen blowout on Famco multi-flue caps: Wind gusts coming across Branch Brook Park’s open stretches hit multi-flue screen panels at odd angles, and the wire screen pulls out of the rolled edge. We re-seat the screen using a crimped stainless channel not the original rolled fold, which holds up better in repeated gust loading.
• Crown spalling under Famco caps: The cement crown underneath a Famco cap often deteriorates faster than expected because the spark screen traps heat and moisture. By the time we pull the cap, the crown edge is chipped or crumbling. We repair with a flexible crown coat system that moves with Newark’s freeze-thaw cycles instead of fighting them.
• Loose mounting brackets on Famco hood-style caps: The clamp tabs on Famco’s rectangular hood caps loosen after two or three seasons of thermal expansion. We replace them with stainless tabs and a torque pattern that accounts for clay flue liners, which most Newark row houses still have and which crack easily under overtightening.
• Bird and squirrel entry through damaged weather stripping: Famco caps with internal weather stripping around the flue collar do not stay sealed forever. We’ve pulled nests from chimneys in Forest Hill and Weequahic where the cap was intact but the strip was gone. We re-strip and add a secondary pest guard where the crown meets the flue.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and scope: You call (862) 245-4309. We ask about the chimney, the Famco cap model if you know it, and what you’re seeing: rust, water streaks, animal noise, loose metal.
2. 2
   Camera inspection: We run the NFPA 211 Level 2 camera down the flue. The camera shows the cap condition from underneath, the crown surface, and the top section of liner. Every frame is saved.
3. 3
   Written price and scope: Corrine Halstead reviews the footage and writes the findings: what needs replacement, what can be repaired, what can wait. The price is written in dollars before any tool comes off the truck.
4. 4
   Parts decision: If the cap needs replacement, we spec a Famco OEM part or a quality aftermarket cap depending on the flue size, crown condition, and your budget. We show you the part name and price on paper before ordering.
5. 5
   Repair and test: Cap is installed, crown is coated or rebuilt, and we test the draft with a draft gauge to make sure the new cap is not restricting airflow. Readings are recorded.
6. 6
   Photo record and warranty: You get before-and-after photos, the draft reading, the written scope, and the written warranty before we leave. That is Clause 4 of the Haven Standard, and we’ve done it on every job since 2009.

Before

After

What Famco Chimney Cap & Crown Costs in Newark

Here are real ranges for the Famco jobs we do most in Newark:

• Famco cap replacement (standard single-flue): $340-$590 installed
• Famco multi-flue cap replacement: $520-$780 installed
• Crown recoat with flexible sealant: $450-$700
• Crown rebuild (if spalling is severe): $900-$1,400
• Screen repair or weather strip replacement: $110-$190

What moves the price: flue size, roof access, whether the crown needs full rebuild versus recoat, and whether the existing Famco cap can be salvaged. As an independent Famco service provider, we’re not tied to a single parts network, which means we can price both OEM and aftermarket options and let you choose. Estimate is free, written, and yours to keep either way.

Why Newark Homeowners Call Level Two Chimney Newark for Famco Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a good portion of those have Famco caps on top. Our techs see the same failure patterns repeated across Newark’s older housing stock: original clay flue liners, crowns that have spalled in the freeze-thaw cycle, and caps that were installed tight once and never touched again. We know how Famco caps fit on those chimneys because we’ve removed, inspected, and reinstalled hundreds of them. If a non-Famco solution fits the job better, we work with DuraFlex, HeatShield, and Gelco parts and we tell you why the switch makes sense. Every job is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right. And because we’re independently owned and operated under the Haven Standard, the price you see is the price you pay, in writing, before work starts.

FAQs